01-28-2017 05:28 AM
05-10-2011 07:11 AM
Thanks for in-put.....finally got to the boat and hooked up ET and no Active
codes or Logged codes, while cranking red flagged Injection Disabled.......
Found no Huei pressure on Manifold...checked Control valve ok, changed out
Heui pump and away she went...strange I had no codes especially a oil pressure
code from the sensor on the Heui manifold !!!!!!!!!!
04-26-2011 10:26 AM
The MPD is not programmed to just display ERROR. There should be some additional information.
If your engine will crank but not start and the display does not have any engine data, then you may have a bad engine ECM