Reply
Highlighted
Contributor

Re: C9 engine loadnto high 100% but bost pressure 1 psi

how is the problem?....solved?

Contributor

Re: C9 engine loadnto high 100% but bost pressure 1 psi

thanks for giving to me the serial number, but did you check the fuel prassure regulator?, the existing part number is 294-8620 and 294-8621.

new part number is 396-6662 and 372-5196.

and the fuel sensor is 194-6725

 

 

Visitor

Re: C9 engine loadnto high 100% but bost pressure 1 psi

S/n: Jsc 26080 (C9), thanks brother
Contributor

Re: C9 engine loadnto high 100% but bost pressure 1 psi

try to install the manual pressure gauge and measure/read the pressure, the pressure normal range should be 66 to 84psi, and at low idle should be 58 to 62 psi,...if found this reading....you can reset/clear the even logged code using the CAT ET, if the code apear again check/renew your fuel pressure sensor and check the wiring of that sensor, maybe short to ground

 

Contributor

Re: C9 engine loadnto high 100% but bost pressure 1 psi

do you have your engine serial number pls? i will try to check it

Visitor

Re: C9 engine loadnto high 100% but bost pressure 1 psi

Thanks alot brother, l am aready c/o cylinderhead and test running but now have even code 94-15 high fuel pressure, do you have idea about high fuel pressure?
Contributor

Re: C9 engine loadnto high 100% but bost pressure 1 psi

what kind of fault code hes been found?.....did you check your afrter cooler condition, maybe your after cooler dirty, and check your fuel pressure 

Visitor

C9 engine loadnto high 100% but bost pressure 1 psi

Hi guys

I have trouble with my engine c9 industrial, if runing without load engine normal (rpm until 2000) but if use attachment enggine load 100% and rpm cant raise up. 

Any one can heĺp???