02-25-2017 02:58 AM
Thanks for the reply i found the problem the ets relay is a timed engine shut off & it is a ground switch located in the machine monitor & the pin in the connector for the monitor was bad i replaced the monitor & that fixed the problem.
01-26-2017 09:55 AM
I would remove and check the fuel shutoff solenoid to see if it actually works. The shutoff solenoid is the only component that actually controls engine run or engine stop.
01-06-2017 12:27 AM
i have a 302.5c that won't shut off, i have checked continuity from the ets relay to the fuel shut off solenoid it check out ok
then i checked the ets relay it's good, anyone have suggestions on where i would check next.