01-31-2013 10:08 PM
I have a 140H with a trans issue. All the gears work and move the machine. 2nd, 3rd ,6th all move the machine put are slugish and will not spin the tires when the moldboard is on the ground. I replaced the common solenoid for those gears and still the same problem. I have removed the solenoid manifold and checked the valve directly inline with the solenoid for movement and cleanliness and all seems fine(no broken springs). Tommorow i am going to check pressures. What should the pressures be? Also I recently replaced the ECM by the Local CAT dealer.I do not know if the flashing of the ECM had somthing to do with it. Any help or advice would be much appreciated!