06-15-2015 03:57 PM
Thank you for the follow up!
Can you please Private Message me your general location information as well. From there we can engage one of local Undercarriage experts to provide additional assistance with this issue.
06-12-2015 12:02 PM
Sorry for the delay, attached are the pictures. The First two show the wear of the guides and the rest attempt to show how the track look as if it is not sitting flat (side to Side) on the ground as I mentioned. Let me know what you think.
06-10-2015 12:09 PM
The machine has the standard bucket, used to do typical excavating. Never had a heavy implement on it. I can send pictures later today.
06-10-2015 11:00 AM
Hi PhoenixRising. We understand your concern. Can you please provide some additional details? What type of work is the machine is doing? Does it have a heavy implement on it? Do you have any pictures you can upload?
06-10-2015 09:43 AM
259B3 - Excessive wear on outer metal track guides
I have a 2013 259B3 Compact Track Loader and the outer metal track guides are wearing much faster than the inner guide. They are wearing against the outer idler wheel. It looks as if the track doesn’t sit flat (Side to Side) on the ground and wants to walk off to the outside of the carriage. Is there any way to adjust the track so it sits flat (Side to Side) on the ground? Has anyone else seen this problem. The machine only has 600 hours on it.