10-01-2013 07:37 AM
09-27-2013 12:46 PM
Still cant get this thing to run. I noticed this morning there is exhaust coming from the Air inatke, everything seems to be running right though. It just will not bust off no oil leaking fuel seems to be good same with the oil pressures. Any Ideas
09-26-2013 10:34 PM
09-26-2013 03:58 PM
hey did find a leak number 6 injector tube when we changed the injector I must have turned in the cone washer on top of the injector. so I borrowed on from another tractor. it is now trying to crank but still nothing the iap pressure was 1300 to 1500 psi which is good with no diag coming up. we are fixing to be getting off and i will bleed the air in the AM. still have 74 code injector 6 current high and th 164-11 coming up though. I am gettting smoke but it looks to be coming through the intake any reason for this some out of exhaust too. And that bad fuel knock sounds like is back, i am guessing it is still not getting enough fuel. thanks for the help.
09-26-2013 02:06 PM
The pump is new and I have had the valve cover off all morning looking for leaks. Should it be spraying or barely seeping or would it matter. The gauges we tried are crapp so I will try to round up a new gauge. With the budget crisis going on they want let us spend any money right now. I am going to need batteries before long lol
09-26-2013 01:28 PM
09-26-2013 08:11 AM
It goes from about 160-210
Injection actuation pressure shows 242 then goes to DIAG
Desired actuation pressure goes straight to 1450 psi
injection actuation output is 100%
The engine serial is 4cw00463 just in case.