10-05-2011 12:20 PM - edited 10-05-2011 12:22 PM
Most the specs we post on our website are for 480 or 400 volt. However you can generate custom spec sheets for your desired voltages via this online tool:
Cat Diesel Generator Set Spec Sheet Wizard
Also if you have not already, we recommend consulting with your local Cat Dealer. You can find them via this link:
Cat Dealer Locator
Hope this helps.
10-06-2011 10:06 PM
When I worked at a dealer we did a project with 6.6kV tail ends, had to do a special rating request, CAT could supply but lead time was VERY long, ended up using an aftermarket tailend and packageing ourselves. It should be available, but will probably have a price and time premium associated with it.
Hope that helps, Mike L.