Reply
Highlighted
Contributor
Accepted Solution

CDVR Shutdown Fault Driver

Hello All,

I am planning to buy 4 new CDVRs for a project. I noticed that the output of this shutdown fault driver is rated for 24V, 100mA. I am not able to activate an external relay with this 100mA since the VA rating of the relay coil is hire than what this output can handle. Could you suggest any alternatives?

Super Contributor

Re: CDVR Shutdown Fault Driver

Use a smaller pilot relay in front of your larger relay, do it all the time.

 

MikeL.

Contributor

Re: CDVR Shutdown Fault Driver

Thank you. I found a smaller relay 😊