08-29-2017 02:20 AM
thanks for giving to me the serial number, but did you check the fuel prassure regulator?, the existing part number is 294-8620 and 294-8621.
new part number is 396-6662 and 372-5196.
and the fuel sensor is 194-6725
08-29-2017 01:50 AM
try to install the manual pressure gauge and measure/read the pressure, the pressure normal range should be 66 to 84psi, and at low idle should be 58 to 62 psi,...if found this reading....you can reset/clear the even logged code using the CAT ET, if the code apear again check/renew your fuel pressure sensor and check the wiring of that sensor, maybe short to ground
08-29-2017 01:08 AM
08-19-2017 08:46 PM
I have trouble with my engine c9 industrial, if runing without load engine normal (rpm until 2000) but if use attachment enggine load 100% and rpm cant raise up.
Any one can heĺp???