Reply
Contributor

Re: 247 Auxilary Outputs

Yes, some time need install a flow meter to check the hyd flow, but you need the spec for the tool that going use for adjust the flow.

New member

Re: 247 Auxilary Outputs

The unit I have does not have a switch to select between High & Normal.

The only switch asscociated with the outputs is a constant flow, which allows you to operate the outputs when the lap bar is raised.

Are you saying I could install a flow meter to adjust the rate?

Contributor

Re: 247 Auxilary Outputs

Hi Weekender,

 

Your machine is high flow outputs or normal flow outputs?

 

Some machine have a monitor or a switch that can selected the high or normal flow.

 

some machine if you change your work tools the flow need to be adjusted with a small flowmeter by the specification at the bran tools.

Highlighted
New member

247 Auxilary Outputs

I have a 247 compact trackloader. Recently aquired a grapple, however when opening and closing the rate at which they operate is too quick. Is there a way to slow this operation down without affecting the other functions of the machine. 

The auxilary hydraulic circuit is the only thing I would like to adjust.

Any suggestions?