Reply
Contributor

Re: I have Excavator 320D ,it has starting problem

Hi Alemsada,

 

Is there smoke indication fromthe muffler when you start the engine?

if No, you can check :

-Error code in the operator screen

-Check Engine RPM and Timing ( may you need ET tool )

-Check Timing Sensor

- Check Fuel High Pressure Sensor

 

if yes; could be :

- Low Fuel Pressure ( minimum to start at least 50 psi max 75 psi )

- Check Fuel Lines, may be any restriction from the Fuel Tank.

- Engine RPM ( minimum 400 rpm ) if less..may you need to check your battery.

New member

Re: I have Excavator 320D ,it has starting problem

the Engine Model is CAT C6.4 ACERT

New member

Re: I have Excavator 320D ,it has starting problem

Thanks for your reply , the Engine Model fro the excavator 320D is C 6.4 ACERT ,waiting for your advice !!!

Contributor

Re: I have Excavator 320D ,it has starting problem

Hi there,

 

What is the engine model you have in you 320D ?

 

Regards,

brahmadi

Highlighted
New member

I have Excavator 320D ,it has starting problem

I have Excavator 320D and it developed strting problem ,first the we pumped the air from the fuel filter and it did start, the second day it refused again and we saw a crack in the cap of the Water /fuel separator and sealed it and changed the water separator and it did started. again the next day it refused and there is a message check filter, fluid information. As we changed the filters recently we took it as different warning but not the problem of starting .one time ,the operator started it by spraying perfume(dash board perfume) in the air cleaner but the problem of starting when it is off it is still there.  please help