12-23-2013 02:20 PM
Hello I happen to have almost the same issue on a cp563. I flip the switch to turn on the vibrator and i get an initial vibrate for a couple of seconds and then nothing.need to know if you may have any vibrator diagnosis literature you could share.
10-29-2013 06:50 PM
Check the pressure you have in your vibration loop. If pressure is high eccentric or motor is jammed if low oil is bypassing (relief valve)
You could uncouple the motor from the vibration housing to see if the shaft rotates. If so either your eccentric maybe jammed or your not building enough pressure to turn it.