Reply
Highlighted
Contributor

Re: C15 emergency stop switch active- present.

1. Take multimeter and check ESB is it work correct (NO, NC contacts).
2. If you have wiring diagram, check dig input
New member

C15 emergency stop switch active- present.

So my problem is, I've gone to start the c15 generator (emcp 3.2) and the isolator switch for the battery was turned off. It's then come up with 'emergency stop switch active present'. Just wondering if anyone's come across this issue and how it's been rectified? Because I cannot clear the code as it stays present and no emergency stop buttons have been pressed.