Reply
Contributor

Re: Power wizard 1.1

All new Power Wizards 1.1 ,1.1+, or 2 also EMCP 4.1, 4.2, 4.3 are having issues with the fuctional buttons ,when you get them stuck or even frozen for some how ,make sure you need to change the whole monitor ,am working on a new flat board design for this problem basically ,however I just need some more units to create lhis low priced solution than buying new one.
Also, I did repairs for more than 1000 monitors of all cat and power wizards monitors veraions such as EMCP I , II and II+ , 3.xx , 4.xx and PW 1.xx , 2.xx ... etc.
EMCP & Power Wizard controllers Repairs
Please check and happy to answer you anytime :
https://www.linkedin.com/pulse/emcp-power-wizard-controllers-repairs-ahmed-helmy
Visitor

Re: Power wizard 1.1

[ Edited ]

Dear Body,

 

I am looking for the power wizard 1.1 digarm connection drwaing kindly if you do have one please send it to me, on otherhand Ithe dispy can not excpet an order for funcationl and its frezen is there any way to rest it.

 

Thenak


 

Contributor

Re: Power wizard 1.1

PW 1 dont have sach function for parallel operstion.
fge. If you want i send wires diagram PW1.0
Contributor

Re: Power wizard 1.1

For parallel operattion better use: DSE or Comap.
New member MM1
New member

Re: Power wizard 1.1

Do you know if Power Wizard 1.1 can parallel to utility? 

Contributor

Re: Power wizard 1.1

It's time to buy a new one. About $150.00.

New member

Re: Power wizard 1.1

I also have a wizard 1.1 and the panel keys/ buttons are not operating, may you please assist me.

 

Highlighted
Contributor

Re: Power wizard 1.1

The generator running but the hours still zero
Contributor

Re: Power wizard 1.1

But i try to change with ET i but 99999999 then the hours changed to zero
Contributor

Re: Power wizard 1.1

No my friend