07-25-2017 09:49 AM
if i pull of the secondary sensor (not just disconnect the connector) and I put that in the place of primary sensor and switch the connectors to the ECM. the ECM will not notice the difference.
Or let's say, if i mad a mistak and put the primary sensor in the place of the secondary, i'will just have to switch the conncetor so it work.
07-25-2017 06:51 AM
07-25-2017 06:14 AM
I'm monitoring an intervention in a Caterpillar C7 ACERT engine.
I can't see why the two speed/timing sensors are not switchable.
Both sensors detect the reference for engine speed and timing from a unique pattern on the camshaft gear, how the ECM can make the difference.
Solved! Go to Solution.