Reply
Highlighted
Contributor

Re: emcp 3.3 replace by DSE MKII

4) scada parameter: temper, oil presh, RPM when STOP and CRANKING changes?
give more info it will be better
Contributor

Re: emcp 3.3 replace by DSE MKII

1) check wiring: DSE (ECU) - ADEM3 (CAN)
2) check soft configuration: choose (adem3 caterpillar)
3) check warnings, alarms connect ET.
Visitor

emcp 3.3 replace by DSE MKII

we try to replace EMCP3.3 by Dse Controller MKII, engine only cranking and no firing? Engine Model 3516B TA,V16,Governor Type ADEM™ A3 Fuel System.What might be the solution?thanks