03-07-2017 08:47 PM
How to calculate the generator exhaust back pressure?
Model Number: 1120kW K50
Air Flow Rate: 5000 L/s
Total length: 328.1 ft
Pipe Size: 16"
No. of 90° Elbows: 18
No. of 45° Elbows: 4
No. of Tees: 1
Silencer: 8" industrial , Side in, End out
03-08-2017 07:09 PM - edited 03-08-2017 07:13 PM
You will need to get a spec sheet from your dealer on the engine to get flow rate and exhaust temperature, the get a copy of LEBW4970 A&I Guide for Exhaust Systems, page 15 has the method on how to do exhaust back pressure calculation. When you get the exhaust flow rate info your silencer supplier should be able to provide backpressure info.
You can find a copy here, http://s7d2.scene7.com/is/content/Caterpillar/CM20160713-53120-15686
Hope that helps, MikeL.