05-24-2017 12:41 AM
I have EMCP 3.2 Monitoring Software for Windows. Is there any way to remote start generator with a set of conditions? Can I do it programmly? Is there any API available?
I need it to start depending on voltage parameter of external device (UPS). I can programmly read both generator and UPS parameters with simple windows service, but I need to start generator depending on those parameters. Any way to do it?
10-28-2017 05:43 PM
03-09-2018 04:46 AM
The eMCP app on my iPhone 7 had been running perfectly until my iPhone did an automatic upgrade to the new iOS 11.3 and now whenever I am trying to open the app it is simply loading a blank white screen during the start up and eventually crashes itself after few seconds. Any idea how to fix it?
04-10-2018 06:16 AM
A handfull of different designs in those days, in reality, the IC contact is across battery negative and the START input from the ECS to the EMCP II, just take a look at your print and you'll be able to figure out where the customer connection is.
08-03-2018 09:55 PM
I have EMCP 3.2 Monitoring Software for Windows. Is there any approach to remote begin generator with an arrangement of conditions? Would i be able to do it programmly? Is there any API accessible? I require it to begin contingent upon voltage parameter of outside gadget (UPS). I can programmly read both generator and UPS parameters with straightforward windows benefit, however I have to begin generator relying upon those parameters. Any approach to do it?
09-05-2018 11:25 PM
The eMCP application on my iPhone 7 had been running consummately until the point that my iPhone completed a programmed move up to the new iOS 11.3 and now at whatever point I am attempting to open the application it is just stacking a clear white screen amid the start up and in the long run crashes itself following couple of moments. Any thought how to settle it?
10-17-2018 11:01 AM
To the extent I know the caterpillar 3.2 EMCP board isn't in the limit that with the states of the system you can giveAs far as I probably am aware the caterpillar 3.2 EMCP board isn't in the limit that with the states of the system you can give arrabque or stop to the prepare Since he has no methods for perusing outside energiesI would prescribe introducing an outer board that you can interface with. The Caterpillar emcp similar to the COMAP They are exceptionally prudent and helpful. For system issues and synchronism.